Overview
Your wastewater treatment systems collect and treat wastewater from your home before releasing it back into the natural environment to restart the cycle. Because having a system that functions as it should is critical for your family’s health and well-being, you must be able to recognize problems before they cause too much harm. In addition, people now choose to live in communities and huge groups as population expansion accelerates. In order to address the treatment concerns on a broader scale, India has installed decentralized wastewater treatment plants. These systems are fantastic because they provide an alternative to a centralized sewage treatment facility. However, the problem arises when the plant is not operating correctly. Wastewater management is a chore that facility managers and their staff despise.
Wastewater management is a crucial job because wastewater issues can quickly escalate into a costly and unpleasant catastrophe.
We’ve put together a list of three things that can go wrong in India’s sewage treatment plants. We’ve also discussed how to resolve these concerns.
Problems in Wastewater treatment systems
Downstream equipment failure:
The first step of the sewage treatment process involves using downstream equipment. The screening process is in charge of removing non-biodegradable floating solids from the water. Solids such as paper, tin, plastic, rags, wood, and containers are frequently coming across in wastewater treatment system. As a result, you must remove these wastes from the water to prevent downstream equipment from harm. Pipe blockages, excessive wear, and tear, and the accumulation of unwanted objects that obstruct the wastewater treatment process are the most common types of waste found. It is possible to clean the screening equipment both mechanically and manually. Many screening products, such as Salsnes or REKO, can significantly improve your downstream equipment’s stability.
Total phosphorus target is not met in treated effluent:
In terms of total phosphorus, we use India’s sewage treatment plant (STP) for the following:
- Using chemicals as little as possible
- Lowering the cost of operations
- To find out how many licences TP has available
There is a specific chemical dosage that we must be following in order to remove or level the total phosphorus target. You can use the fast analysis below to analyze the treatment facility and determine which chemical will work best.
Pre-precipitation:
To remove the Phosphorous from the settling tank, we need to use a chemical dosing technique. This is classified as pre-precipitation when it occurs before the biological process, during the primary stage. You can use an online phosphate measurement between the primary settling and aeration tanks to figure out how much phosphate is in your water. You’ll be able to control feedback as a result of this.
Post-precipitation:
It is when phosphorus is removed from final clarifiers or effluent filters by chemical dosing following the biological process. Between the final clarifier and the aeration tank with feedback control, the measurement should be obtained.
Simultaneous dosage:
When chemical dosing occurs before and after the biological process, it is referred to as simultaneous dosing. This contributes to the effluent having low phosphorus levels.
The wastewater treatment plant is experiencing odor issues:
The presence of hydrogen sulfide, organic acids, and mercaptans in wastewater treatment system might cause them to stink, which encourages bacteria to reduce sulfur. H2S, or hydrogen sulfide, is a foul-smelling, colorless gas that is exceedingly corrosive. As a result, removing hydrogen sulfide gas is critical to avoid downstream device problems. Any step could be the source of the odor. As a result, identifying the source becomes extremely challenging. You could contact the plant installers who can inspect your plant for you in order to determine the source and eliminate the odor.
What causes the failure of wastewater treatment systems?
There are various reasons why your wastewater treatment systems may no longer function properly. The most typical cause of such problems is flushing non-degradable objects into the system, which causes it to become clogged. In addition, if you’ve been washing harsh chemicals into your treatment system, this can disrupt the natural microbial balance that your wastewater treatment system relies on to function properly. One of the most serious problems facing wastewater treatment plants is energy consumption. Filtration of wastewater consumes 3% to 15% of the nation’s annual electricity. That’s a lot of filtration power. The good news is that we develop cleaner and more environmentally friendly wastewater treatment methods. We can lower the amount of energy consumed to treat wastewater by combining these greener technologies while preserving the current water treatment infrastructure.
Sometimes heavy rain and extreme weather can cause your treatment system to stop working, so the issues may not be directly related to something you’ve done.
What should you do if your wastewater treatment system is not functioning?
If you suspect that your wastewater treatment systems isn’t working properly, you can conduct some preliminary research on your own. You can see if the issue is with the soakaway pit, which is where your system drains the treated wastewater. You can also see if the problem stems from the pipes that connect your home to the treatment system. Once you’ve identified the problem, you should hire a professional to fix it because they’ll have the essential expertise and knowledge to solve it and get your treatment system back up and running.
Even if you can’t pinpoint the source of the issue, get an expert to conduct a thorough inspection and evaluation to establish what’s out of whack. Even if you can’t pinpoint the source of the issue, get an expert to conduct a thorough inspection and evaluation to establish what’s out of whack.
What steps can you take to avoid problems?
Regular care and maintenance, like with any other system in your home, will, for the most part, keep problems at bay. Ensure that your treatment system is de-sludged on a regular basis, and avoid disposing of any non-degradable or harsh chemicals through it. Don’t disregard a problem after it’s been recognized. Fixing problems promptly is the key to getting your system back up and running, lowering the expense of resolving the issue, and avoiding a tiring process. Isn’t it obvious that when it comes to recognizing and resolving problems with your wastewater treatment system, you should move quickly?
Bottom Line
Please get in touch with us so that we can assist you in resolving all of your wastewater treatment facility issues. We are one of India’s most dependable chemical suppliers, with a strong commitment to product quality and performance. Get in touch with us right now by filling out our contact form! We are happy to hear from you.
Do you find this article interesting? Then please check out the rest of the blogs too. We’re sure that you’ll find them fascinating and valuable as well.
